AMS-IX Port Configuration Hints
(version 1.27, 2007-11-29)
Steven Bakker, AMS-IX NOC
Amsterdam Internet Exchange, B.V.
E-mail:
<noc@ams-ix.net>
This article gives some pointers towards setting up your device when connecting to the AMS-IX. AMS-IX rules restrict the type of traffic and number of source MAC addresses that any member is allowed to send to the exchange.
This article is also available as a single html file, or a PDF file, both of which are suitable for printing.
- Table of Contents
- 1. Introduction
- 1.1. Definition of Terms
- 2. General Configuration Recommendations
- 3. Allowed Traffic Types and Configurations
- 4. Cisco Configuration Hints
- 4.1. Global Config
- 4.2. Interface Config
- 4.3. Layer 2 Config
- 5. Extreme Networks Configuration Hints
- 5.1. L2 Configuration
- 5.2. L3 Configuration
- 6. Force10 Configuration Hints
- 7. Foundry Configuration Hints
- 8. Juniper Configuration Hints
- 9. Linux Configuration Hints
- 10. Riverstone Configuration Hints
- 11. Acknowledgements
| Next | ||
| Introduction |